Render fixing FIF-CN II 8

The pre-assembled drive anchor with innovative steel-plastic nail

The ETA approved fischer render fixing FIF-CN II is ideal for securely fixing pressure-resistant insulation up to 350 mm thick in the plaster façade such as polystyrene boards, mineral wool boards, wood wool lightweight panels and cork boards / coir matting in concrete, solid and perforated brick. The render fixing comprises a grey plug sleeve with attached preshaped octogonal disc and a steel-plastic nail. The FIF-CN II is set using a hammer. The innovative plastic nail with a steel point supports high loads.

To all Variants

Advantages

To set with few hammer blows.
The disc fits tight into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
High retention forces thanks to the steel tip of the compound nail.
Small anchoring depth of 35 mm saves on drilling times.
The FIF-CN II 8 is virtually free of thermal bridging due to the compound nail.
The compression zone in the shank allows the disc to be drawn in precisely.
For insulating material thicknesses up to 340 mm.

Variant

ETA-approval

Drill hole diameter

d₀

Min. drill hole depth

h₁

Min. anchorage depth

h_nom (h_v)

Anchor length

FIF-CN II 8/340 Art.-No. 546457

8 [mm]

45 [mm]

35 [mm]

388 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	388 [mm]
Max. usable length t_fix	350 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962330052

To product variant

FIF-CN II 8/320 Art.-No. 546456

8 [mm]

45 [mm]

35 [mm]

368 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	368 [mm]
Max. usable length t_fix	330 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962330045

To product variant

FIF-CN II 8/300 Art.-No. 546455

8 [mm]

45 [mm]

35 [mm]

348 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	348 [mm]
Max. usable length t_fix	310 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962330038

To product variant

FIF-CN II 8/280 Art.-No. 546454

8 [mm]

45 [mm]

35 [mm]

328 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	328 [mm]
Max. usable length t_fix	290 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962330021

To product variant

FIF-CN II 8/260 Art.-No. 546453

8 [mm]

45 [mm]

35 [mm]

308 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	308 [mm]
Max. usable length t_fix	270 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962330014

To product variant

FIF-CN II 8/240 Art.-No. 546452

8 [mm]

45 [mm]

35 [mm]

288 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	288 [mm]
Max. usable length t_fix	250 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962330007

To product variant

FIF-CN II 8/220 Art.-No. 546451

8 [mm]

45 [mm]

35 [mm]

268 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	268 [mm]
Max. usable length t_fix	230 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962329995

To product variant

FIF-CN II 8/200 Art.-No. 546450

8 [mm]

45 [mm]

35 [mm]

248 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	248 [mm]
Max. usable length t_fix	210 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962329988

To product variant

FIF-CN II 8/180 Art.-No. 546449

8 [mm]

45 [mm]

35 [mm]

228 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	228 [mm]
Max. usable length t_fix	190 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962329971

To product variant

FIF-CN II 8/160 Art.-No. 546448

8 [mm]

45 [mm]

35 [mm]

208 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	208 [mm]
Max. usable length t_fix	170 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962329964

To product variant

FIF-CN II 8/140 Art.-No. 546447

8 [mm]

45 [mm]

35 [mm]

188 [mm]

Attributes

ETA-approval
Drill hole diameter d₀	8 [mm]
Min. drill hole depth h₁	45 [mm]
Min. anchorage depth h_nom (h_v)	35 [mm]
Anchor length l	188 [mm]
Max. usable length t_fix	150 [mm]
Disc Ø	60 [mm]
Drive	—
Amount	100 Unit(s)
GTIN (EAN Code)	4048962329957

To product variant

Approvals

Title	Type	Created	Valid Till
Title ETA - European Technical Assessment (PDF, 2 MB)	Type ETA-18/0393	Created 5/29/2018	Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB)	Type DoP No. 0143	Created 6/6/2018	Valid Till