termoz CN 8

The high-performance ETICS hammerset fixing with compound nail

The fischer termoz CN is ideal for fixing pressure-resistant insulation 400 mm thick such as polystyrene boards or mineral wool boards, wood wool lightweight panels in concrete, solid and perforated brick, lightweight aggregate concrete and aerated concrete securely. The European Technical Assessment guarantees a secure hold. The fischer termoz CN comprises a grey plug sleeve with attached disc and a compound nail. The termoz CN is set with a hammer. Alongside the small drill hole depth, this saves time and money during installation. The steel point of the compound nail guarantees high holding forces. Thanks to the flat plug disc, a cheap, thin reinforced plaster layer can be applied.

Advantages
  • To set with few hammer blows.
  • The disc fits tight  into the insulation thanks to its thickness of only 2.5 mm. Thus allows the application of low-cost, thin reinforcement layers.
  • High retention forces thanks to the steel tip of the compound nail.
  • Small anchoring depth of 35 mm saves on drilling times.
  • The Termoz CN is virtually  free of thermal bridging due to the compound nail.
  • The compression zone in the shank allows the disc to be drawn in precisely.
  • Can be combined with the insulating discs DT 90, DT 110 and DT 140 for very soft insulating materials.
  • For insulating material thicknesses up to 340 mm.
Variant
ETA-approval
Drill hole diameter
d0
Min. drill hole depth
h1
Effect. anchorage depth
hef
Anchor length
l
termoz CN 8/370 Art.-No. 507431
8 [mm]
45 [mm]
35 [mm]
368 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
368 [mm]
Max. usable length
tfix
330 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081114 
termoz CN 8/350 Art.-No. 507430
8 [mm]
45 [mm]
35 [mm]
348 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
348 [mm]
Max. usable length
tfix
310 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081107 
termoz CN 8/330 Art.-No. 507429
8 [mm]
45 [mm]
35 [mm]
328 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
328 [mm]
Max. usable length
tfix
290 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081091 
termoz CN 8/310 Art.-No. 507428
8 [mm]
45 [mm]
35 [mm]
308 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
308 [mm]
Max. usable length
tfix
270 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081084 
termoz CN 8/290 Art.-No. 507427
8 [mm]
45 [mm]
35 [mm]
288 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
288 [mm]
Max. usable length
tfix
250 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081077 
termoz CN 8/270 Art.-No. 507426
8 [mm]
45 [mm]
35 [mm]
268 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
268 [mm]
Max. usable length
tfix
230 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081060 
termoz CN 8/250 Art.-No. 507425
8 [mm]
45 [mm]
35 [mm]
248 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
248 [mm]
Max. usable length
tfix
210 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081053 
termoz CN 8/230 Art.-No. 507424
8 [mm]
45 [mm]
35 [mm]
228 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
228 [mm]
Max. usable length
tfix
190 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081046 
termoz CN 8/210 Art.-No. 507423
8 [mm]
45 [mm]
35 [mm]
208 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
208 [mm]
Max. usable length
tfix
170 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081039 
termoz CN 8/190 Art.-No. 507422
8 [mm]
45 [mm]
35 [mm]
188 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
188 [mm]
Max. usable length
tfix
150 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081022 
termoz CN 8/170 Art.-No. 507421
8 [mm]
45 [mm]
35 [mm]
168 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth
h1
45 [mm]
Effect. anchorage depth
hef
35 [mm]
Anchor length
l
168 [mm]
Max. usable length
tfix
130 [mm]
Disc Ø 60 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4048962081015 

Approvals

 
Title Type Created Valid Till
Title ETA - European Technical Assessment (PDF, 5 MB) European Technical Assessment for fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8 Type ETA-09/0394 Created 12/19/2017 Valid Till
Title ETA - European Technical Assessment (PDF, 3 MB) European Technical Assessment for fischer termoz CN 8 Type ETA-09/0394 Created 3/18/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 2 MB) Type DoP No. 0055 Created 3/29/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 6 MB) Declaration of Performance fischer termoz CN 8 / fischer termoz CN 8 R / fischer termoz CNplus 8, according European Technical Assessment ETA-09/0394 Type DoP No. 0091 Created 4/6/2017 Valid Till
Title DOP - Declaration of Performance (PDF, 4 MB) Type DoP No. 0112 Created 1/4/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Type DoP No. 0756-CPD-0274 Created 6/18/2013 Valid Till