Heavy-duty anchor TA M-S

Heavy-duty internal threaded anchor with screw for low edge clearances

The fischer heavy-duty anchor TA M is an internal threaded anchor made from zinc-plated steel for pre-positioned installation. The heavy-duty anchor is ideal for anchoring fall protection devices, systems, and machines in non-cracked concrete. The optimised anchor geometry minimises setting energy and allows for use in really confined spaces. During the installation, the cone is pulled into the expansion sleeve and expands it against the drill hole wall. The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial clearances.

To all Variants
Advantages
  • The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
  • The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
  • The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
  • The red plastic cap protects against soiling and thus ensures free-running of the thread.
Variant
ETA-approval
Drill hole diameter
d0
Anchor length
l
Min. drill hole depth
h1
Max. fixture thickness
t fix
TA M12 S/25 K NV Art.-No. 539967
— 
18 [mm]
— 
— 
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 18 [mm]
Anchor length — 
Min. drill hole depth — 
Max. fixture thickness — 
Screw — 
Width across nut — 
Washer (outer diameter x thickness) — 
Amount — 
GTIN (EAN Code) 4048962273908 
To product variant
TA M10 S/20 K NV Art.-No. 539966
— 
15 [mm]
69 [mm]
90 [mm]
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 15 [mm]
Anchor length
l
 69 [mm]
Min. drill hole depth
h1
 90 [mm]
Max. fixture thickness — 
Screw — 
Width across nut — 
Washer (outer diameter x thickness) — 
Amount — 
GTIN (EAN Code) 4048962273830 
To product variant
TA M8 S/10 BP K NV Art.-No. 546129
— 
12 [mm]
56 [mm]
70 [mm]
10 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 12 [mm]
Anchor length
l
 56 [mm]
Min. drill hole depth
h1
 70 [mm]
Max. fixture thickness
t fix
 10 [mm]
Screw
Ø x length
 M 8 x 65 
Width across nut 13 [mm]
Washer (outer diameter x thickness) 16 x 1,6 [mm]
Amount 4 Unit(s)
GTIN (EAN Code) 4048962327106 
To product variant
TA M8 S/10 K NV Art.-No. 090923
— 
12 [mm]
56 [mm]
70 [mm]
10 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 12 [mm]
Anchor length
l
 56 [mm]
Min. drill hole depth
h1
 70 [mm]
Max. fixture thickness
t fix
 10 [mm]
Screw
Ø x length
 M 8 x 65 
Width across nut 13 [mm]
Washer (outer diameter x thickness) 16 x 1,6 [mm]
Amount — 
GTIN (EAN Code) 4006209909232 
To product variant
TA M6 S/10 BP K NV Art.-No. 546128
— 
10 [mm]
49 [mm]
65 [mm]
10 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 10 [mm]
Anchor length
l
 49 [mm]
Min. drill hole depth
h1
 65 [mm]
Max. fixture thickness
t fix
 10 [mm]
Screw
Ø x length
 M 6 x 60 
Width across nut 10 [mm]
Washer (outer diameter x thickness) 12 x 1,6 [mm]
Amount 4 Unit(s)
GTIN (EAN Code) 4048962327090 
To product variant
TA M6 S/10 K NV Art.-No. 090922
— 
10 [mm]
49 [mm]
65 [mm]
10 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 10 [mm]
Anchor length
l
 49 [mm]
Min. drill hole depth
h1
 65 [mm]
Max. fixture thickness
t fix
 10 [mm]
Screw
Ø x length
 M 6 x 60 
Width across nut 10 [mm]
Washer (outer diameter x thickness) 12 x 1,6 [mm]
Amount — 
GTIN (EAN Code) 4006209909225 
To product variant
Legend   =   Permission Available —  =   Permission not Available

Additional Documents