Expansion plug S

The installation-friendly nylon plug with 2-way expansion

The fischer expansion plug S is the original. The plastic fixing is made from high-quality nylon and is particularly robust. The fischer expansion plug S is offered for fixings in drill diameters from 4 to 20 mm and therefore can be used in a variety of applications. The lean plug geometry simplifies installation. The characteristic anti-rotation locks prevent the plug from rotating as the screw is tightened. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing light objects in concrete and solid masonry.

Advantages
  • The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity.
  • As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances.
  • The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation.
  • The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety.
Variant
Drill hole diameter
d0
Anchor length
l
Min. drill hole depth
h1
Wood and chipboard screws
ds
Card contents
ST 1 S8 S Art.-No. 060510
8 [mm]
7.5 [mm]
 
 
 

Attributes

Drill hole diameter
d0
8 [mm]
Anchor length
l
7.5 [mm]
Min. drill hole depth  
Wood and chipboard screws  
Card contents  
Cartons of  
Amount 34 Unit(s)
GTIN (EAN Code) 4006209605103 
S 6 in bucket Art.-No. 508024
6 [mm]
30 [mm]
40 [mm]
4 - 5 [mm]
 

Attributes

Drill hole diameter
d0
6 [mm]
Anchor length
l
30 [mm]
Min. drill hole depth
h1
40 [mm]
Wood and chipboard screws
ds
4 - 5 [mm]
Card contents  
Cartons of  
Amount  
GTIN (EAN Code) 4048962091212 
S 10 DP Art.-No. 050127
10 [mm]
50 [mm]
70 [mm]
6 - 8 [mm]
 

Attributes

Drill hole diameter
d0
10 [mm]
Anchor length
l
50 [mm]
Min. drill hole depth
h1
70 [mm]
Wood and chipboard screws
ds
6 - 8 [mm]
Card contents  
Cartons of  
Amount 100 Unit(s)
GTIN (EAN Code) 4006209501276 
S 8 DP Art.-No. 050126
8 [mm]
40 [mm]
55 [mm]
4,5 - 6 [mm]
 

Attributes

Drill hole diameter
d0
8 [mm]
Anchor length
l
40 [mm]
Min. drill hole depth
h1
55 [mm]
Wood and chipboard screws
ds
4,5 - 6 [mm]
Card contents  
Cartons of  
Amount 200 Unit(s)
GTIN (EAN Code) 4006209501269 
S 6 DP Art.-No. 050125
6 [mm]
30 [mm]
40 [mm]
4 - 5 [mm]
 

Attributes

Drill hole diameter
d0
6 [mm]
Anchor length
l
30 [mm]
Min. drill hole depth
h1
40 [mm]
Wood and chipboard screws
ds
4 - 5 [mm]
Card contents  
Cartons of  
Amount 200 Unit(s)
GTIN (EAN Code) 4006209501252 
S 5 DP Art.-No. 050124
5 [mm]
25 [mm]
35 [mm]
3 - 4 [mm]
 

Attributes

Drill hole diameter
d0
5 [mm]
Anchor length
l
25 [mm]
Min. drill hole depth
h1
35 [mm]
Wood and chipboard screws
ds
3 - 4 [mm]
Card contents  
Cartons of  
Amount 200 Unit(s)
GTIN (EAN Code) 4006209501245 
S 20 Art.-No. 050120
20 [mm]
90 [mm]
120 [mm]
16 [mm]
 

Attributes

Drill hole diameter
d0
20 [mm]
Anchor length
l
90 [mm]
Min. drill hole depth
h1
120 [mm]
Wood and chipboard screws
ds
16 [mm]
Card contents  
Cartons of  
Amount 5 Unit(s)
GTIN (EAN Code) 4006209501207 
S 16 Art.-No. 050116
16 [mm]
80 [mm]
100 [mm]
12 (1/2") [mm]
 

Attributes

Drill hole diameter
d0
16 [mm]
Anchor length
l
80 [mm]
Min. drill hole depth
h1
100 [mm]
Wood and chipboard screws
ds
12 (1/2") [mm]
Card contents  
Cartons of  
Amount 10 Unit(s)
GTIN (EAN Code) 4006209501160 
S 14 Art.-No. 050114
14 [mm]
75 [mm]
90 [mm]
10 - 12 [mm]
 

Attributes

Drill hole diameter
d0
14 [mm]
Anchor length
l
75 [mm]
Min. drill hole depth
h1
90 [mm]
Wood and chipboard screws
ds
10 - 12 [mm]
Card contents  
Cartons of  
Amount 20 Unit(s)
GTIN (EAN Code) 4006209501146 
S 12 Art.-No. 050112
12 [mm]
60 [mm]
80 [mm]
8 - 10 [mm]
 

Attributes

Drill hole diameter
d0
12 [mm]
Anchor length
l
60 [mm]
Min. drill hole depth
h1
80 [mm]
Wood and chipboard screws
ds
8 - 10 [mm]
Card contents  
Cartons of  
Amount 25 Unit(s)
GTIN (EAN Code) 4006209501122 
S 10 Art.-No. 050110
10 [mm]
50 [mm]
70 [mm]
6 - 8 [mm]
 

Attributes

Drill hole diameter
d0
10 [mm]
Anchor length
l
50 [mm]
Min. drill hole depth
h1
70 [mm]
Wood and chipboard screws
ds
6 - 8 [mm]
Card contents  
Cartons of  
Amount 50 Unit(s)
GTIN (EAN Code) 4006209501108 

Additional Documents