fischer representative in Georgia+995 32 240 35 40
GEENRU
Fixing Solutions
fischer Additional plate DT

Insulation fixings

Additional plate DT

Additional plates in 90, 110 and 140 mm diameters for compatible TermoZ, FIF and TermoFix fixings. Used for flush installation of ETICS boards with low compressive strength, such as soft mineral wool.

Manufacturer variants. Availability in Georgia and delivery times are confirmed on enquiry.

Dimensions and article numbers follow the Fischer catalogue. Availability and delivery are confirmed on enquiry.

Fischer product information ↗

Check the exact variant, substrate and installation conditions against Fischer technical documentation.

Variants and article numbers
Article no.ModelSpecifications
008889DT 90Disc diameter: 90 mm
Disc height: 3,9 mm
Through hole diameter: 16 mm
Pack quantity: 100 pcs
090745DT 110Disc diameter: 110 mm
Disc height: 3,9 mm
Through hole diameter: 16 mm
Pack quantity: 100 pcs
008690DT 140Disc diameter: 140 mm
Disc height: 4,2 mm
Through hole diameter: 16 mm
Pack quantity: 100 pcs

Products / fischer

Insulation fixings

Choose a product and variant, specify quantities and request a tailored quotation.

14 products
fischer TermoZ CNplus
Insulation fixingsTermoZ CNplus

Hammerset fixing for attaching ETICS insulation boards to concrete and masonry. It can also be screwed in, allowing the plate to be set flush or recessed.

Variants: 15
Price on request
fischer TermoZ CN 8
Insulation fixingsTermoZ CN 8

Hammerset fixing with a steel-tipped compound nail for ETICS boards on concrete and masonry. The plate sits flush with insulation such as polystyrene or mineral wool.

Variants: 15
Price on request
fischer TermoZ PN 8
Insulation fixingsTermoZ PN 8

Hammerset fixing with a glass-fibre-reinforced plastic nail for ETICS boards on concrete, solid masonry and hollow masonry. Designed for flush installation in insulation including polystyrene and mineral wool.

Variants: 7
Price on request
fischer TermoZ SV II EcoTwist
Insulation fixingsTermoZ SV II EcoTwist

Screw fixing for attaching ETICS EPS and homogeneous mineral wool boards to concrete and masonry. A dedicated setting tool screws the plate into the insulation for recessed installation.

Variants: 3
Price on request
fischer TermoZ CS II
Insulation fixingsTermoZ CS II

Screw fixing for attaching ETICS insulation boards to concrete, solid masonry and hollow masonry. Supports flush or recessed installation; recessed setting requires the TermoZ CS setting tool.

Variants: 19
Price on request
fischer TermoZ CS II DT 110 V
Insulation fixingsTermoZ CS II DT 110 V

Pre-assembled screw fixing with a 110 mm plate for soft ETICS boards such as mineral wool. Designed for recessed installation on concrete and masonry using the CS setting tool.

Variants: 18
Price on request
fischer TermoZ 6H
Insulation fixingsTermoZ 6H

Screw fixing for ETICS boards on wood and panel substrates, including OSB, MDF and gypsum fibreboard, without pre-drilling. The 6H setting tool supports flush or recessed installation.

Variants: 20
Price on request
fischer TermoFix 6H-NT
Insulation fixingsTermoFix 6H-NT

Pre-assembled screw fixing with a polyamide plate for ETICS boards on wood and panel substrates. Installs flush without pre-drilling, with recessed installation possible in suitable insulation using the TSS setting tool.

Variants: 14
Price on request
fischer Setting tools
Insulation fixingsSetting tools

Setting tools for recessing ETICS fixings into insulation. Each tool version is matched to a specific fixing type.

Variants: 6
Price on request
fischer Bits
Insulation fixingsBits

Replacement bits for ETICS setting tools: TX30 for CS and 6H, and TX25 for CNplus. Each version is matched to its respective setting tool.

Variants: 3
Price on request
fischer Dismounting tool
Insulation fixingsDismounting tool

Dedicated tool for removing TermoZ CNplus hammerset fixings and TermoZ CS II screw fixings when dismantling an ETICS façade.

Variants: 1
Price on request
fischer Round cap MW / PS
Insulation fixingsRound cap MW / PS

Insulation caps for covering recesses above ETICS fixing plates. They are inserted by hand to create an even insulation surface before applying reinforced render.

Variants: 4
Price on request
fischer Closing plug (TermoZ SV II EcoTwist)
Insulation fixingsClosing plug (TermoZ SV II EcoTwist)

MW and PS closing plugs for insulation openings left after installing TermoZ SV II EcoTwist in ETICS. They are pushed in by hand to finish flush with the insulation before reinforced render is applied.

Variants: 2
Price on request
fischer Additional plate DT
Insulation fixingsAdditional plate DT

Additional plates in 90, 110 and 140 mm diameters for compatible TermoZ, FIF and TermoFix fixings. Used for flush installation of ETICS boards with low compressive strength, such as soft mineral wool.

Variants: 3
Price on request

Dimensions and article numbers follow the Fischer catalogue. Availability and delivery are confirmed on enquiry.

FIXING SOLUTIONS / GEORGIA

Let’s talk about your project.

A single anchor or an entire project — get in touch for product selection and pricing.

Phone+995 32 240 35 40
Emailfischer.center@fixings.ge
Visit us9 Raphiel Agladze Street, Tbilisi ↗

Your project starts here

Request a quotation

Review variants and article numbers, enter quantities and specify the order unit in the comment.

Privacy

Your language and selected products are stored in your browser. The form prepares a message in your email app; information is shared with the company when you send that email. The YouTube player loads only on request and shares data with YouTube during playback. This site uses no advertising or analytics trackers of its own.