Concrete screw ULTRACUT FBS II US

The high-performance concrete screw for absolute installation ease

The fischer concrete screw ULTRACUT FBS II US is a powerful anchoring solution with top installation comfort. The concrete screw with its pressed-on washer is ideal for slot fixations and the anchoring of wooden constructions as well as beams and sills. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety. The saw tooth geometry enables a quick and easy installation. No drill hole cleaning is required for installation in ceilings and floors. The expansion-free anchorage system enables low edge and axial spacings.

Advantages
  • With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.
  • The special saw tooth geometry enables fast cutting into the concrete.
  • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
  • Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
  • The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
  • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
  • The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
Variant
ETA-approval
DIBt-approval
Drill hole diameter
d0
Min. drill hole depth for through fixings
h2
Screw
ds x ls
FBS II 8x80 30/15 US TX Art.-No. 536853
8 [mm]
90 [mm]
10 x 80 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth for through fixings
h2
90 [mm]
Screw
ds x ls
10 x 80 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 50 / 30 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 65 / 15 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 65 / 15 [mm]
Drive TX40/SW13 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962251364 
Contents  
Type of packaging  
FBS II 8x70 20/5 US TX Art.-No. 536852
8 [mm]
80 [mm]
10 x 70 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth for through fixings
h2
80 [mm]
Screw
ds x ls
10 x 70 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 50 / 20 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 65 / 5 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 65 / 5 [mm]
Drive TX40/SW13 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962251357 
Contents  
Type of packaging  
FBS II 8x55 5/- US TX Art.-No. 536851
8 [mm]
65 [mm]
10 x 55 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
8 [mm]
Min. drill hole depth for through fixings
h2
65 [mm]
Screw
ds x ls
10 x 55 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 50 / 5 [mm]
Screw-in depth with fixture thickness hnom2 / tfix - / - [mm]
Screw-in depth with fixture thickness hnom3 / tfix - / - [mm]
Drive TX40/SW13 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962251340 
Contents  
Type of packaging  
14 [mm]
165 [mm]
16 x 150 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
14 [mm]
Min. drill hole depth for through fixings
h2
165 [mm]
Screw
ds x ls
16 x 150 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 65 / 85 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 85 / 65 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 115 / 35 [mm]
Drive SW 21 
Amount 10 Unit(s)
GTIN (EAN Code) 4048962251616 
Contents  
Type of packaging  
14 [mm]
140 [mm]
16 x 125 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
14 [mm]
Min. drill hole depth for through fixings
h2
140 [mm]
Screw
ds x ls
16 x 125 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 65 / 60 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 85 / 40 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 115 / 10 [mm]
Drive SW 21 
Amount 10 Unit(s)
GTIN (EAN Code) 4048962251609 
Contents  
Type of packaging  
FBS II 14x100 35/15/- US Art.-No. 536876
14 [mm]
115 [mm]
16 x 100 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
14 [mm]
Min. drill hole depth for through fixings
h2
115 [mm]
Screw
ds x ls
16 x 100 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 65 / 35 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 85 / 15 [mm]
Screw-in depth with fixture thickness hnom3 / tfix - / - [mm]
Drive SW 21 
Amount 20 Unit(s)
GTIN (EAN Code) 4048962251593 
Contents  
Type of packaging  
FBS II 14x95 30/10/- US Art.-No. 536875
14 [mm]
110 [mm]
16 x 95 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
14 [mm]
Min. drill hole depth for through fixings
h2
110 [mm]
Screw
ds x ls
16 x 95 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 65 / 30 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 85 / 10 [mm]
Screw-in depth with fixture thickness hnom3 / tfix - / - [mm]
Drive SW 21 
Amount 20 Unit(s)
GTIN (EAN Code) 4048962251586 
Contents  
Type of packaging  
FBS II 14x75 10/-/- US Art.-No. 536874
14 [mm]
90 [mm]
16 x 75 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
14 [mm]
Min. drill hole depth for through fixings
h2
90 [mm]
Screw
ds x ls
16 x 75 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 65 / 10 [mm]
Screw-in depth with fixture thickness hnom2 / tfix - / - [mm]
Screw-in depth with fixture thickness hnom3 / tfix - / - [mm]
Drive SW 21 
Amount 20 Unit(s)
GTIN (EAN Code) 4048962251579 
Contents  
Type of packaging  
12 [mm]
160 [mm]
14 x 150 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
12 [mm]
Min. drill hole depth for through fixings
h2
160 [mm]
Screw
ds x ls
14 x 150 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 60 / 90 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 75 / 75 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 100 / 50 [mm]
Drive SW 17 
Amount 20 Unit(s)
GTIN (EAN Code) 4048962251562 
Contents  
Type of packaging  
12 [mm]
140 [mm]
14 x 130 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
12 [mm]
Min. drill hole depth for through fixings
h2
140 [mm]
Screw
ds x ls
14 x 130 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 60 / 70 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 75 / 55 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 100 / 30 [mm]
Drive SW 17 
Amount 20 Unit(s)
GTIN (EAN Code) 4048962251555 
Contents  
Type of packaging  
12 [mm]
120 [mm]
14 x 110 [mm]

Attributes

ETA-approval
DIBt-approval
Drill hole diameter
d0
12 [mm]
Min. drill hole depth for through fixings
h2
120 [mm]
Screw
ds x ls
14 x 110 [mm]
Screw-in depth with fixture thickness hnom1 / tfix 60 / 50 [mm]
Screw-in depth with fixture thickness hnom2 / tfix 75 / 35 [mm]
Screw-in depth with fixture thickness hnom3 / tfix 100 / 10 [mm]
Drive SW 17 
Amount 20 Unit(s)
GTIN (EAN Code) 4048962251548 
Contents  
Type of packaging  

Approvals

 
Title Type Created Valid Till
Title ETA - European Technical Assessment (PDF, 5 MB) European Technical Assessment for fischer concrete screw ULTRACUT FBS II Type ETA-15/0352 Created 10/30/2018 Valid Till
Title DOP - Declaration of Performance (PDF, 2 MB) Type DoP No. 0078 Created 4/19/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 3 MB) Type DoP No. 0146 Created 11/6/2018 Valid Till
Title DIBt, National German Approval (PDF, 1 MB) Type Z-21.8-2049 Created 7/13/2016 Valid Till 7/13/2021