Nail anchor FNA II

The installation-friendly hammerset anchor for multiple fixings

The fischer nail anchor FNA II with a nail head is made from zinc-plated steel, stainless steel, and highly corrosion-resistant steel. The FNA II is primarily suitable for the anchoring of fire protection boards, ventilation systems, metal rails, and subframe systems. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is mounted in a few hammer blows or with a hammer drill in a time-saving push-through installation. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.

To all Variants
Advantages
  • The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
  • The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
  • The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
  • The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
  • A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.
Variant
ETA-approval
Drill hole diameter
d0
Min. drill hole depth for through fixings
h2
Anchor length
l
Max. fixture thickness
t fix
FNA II 6 x 30/20 A4 Art.-No. 502737
— 
6 [mm]
— 
55 [mm]
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings — 
Anchor length
l
 55 [mm]
Max. fixture thickness — 
Head-Ø — 
Amount — 
GTIN (EAN Code) 4048962015607 
To product variant
FNA II 6 x 30/15 A4 (200ST) Art.-No. 540877
— 
6 [mm]
— 
— 
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings — 
Anchor length — 
Max. fixture thickness — 
Head-Ø — 
Amount — 
GTIN (EAN Code) 4048962281606 
To product variant
FNA II 6 x 30/15 (200St.) Art.-No. 530420
— 
6 [mm]
— 
— 
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings — 
Anchor length — 
Max. fixture thickness — 
Head-Ø — 
Amount — 
GTIN (EAN Code) 4048962202984 
To product variant
FNA II 6 x 30/15 Art.-No. 530419
6 [mm]
55 [mm]
50 [mm]
15 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 55 [mm]
Anchor length
l
 50 [mm]
Max. fixture thickness
t fix
 15 [mm]
Head-Ø — 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962202977 
To product variant
FNA II 6 x 30/5 C Art.-No. 518441
6 [mm]
45 [mm]
40 [mm]
5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 45 [mm]
Anchor length
l
 40 [mm]
Max. fixture thickness
t fix
 5 [mm]
Head-Ø dK 13.0 [mm]
Amount — 
GTIN (EAN Code) 4048962150360 
To product variant
FNA II 6 x 30/5 C Art.-No. 044124
6 [mm]
45 [mm]
40 [mm]
5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 45 [mm]
Anchor length
l
 40 [mm]
Max. fixture thickness
t fix
 5 [mm]
Head-Ø dK 13.0 [mm]
Amount 25 Unit(s)
GTIN (EAN Code) 4006209441244 
To product variant
FNA II 6 x 30/5 A4 Art.-No. 044122
6 [mm]
45 [mm]
40 [mm]
5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 45 [mm]
Anchor length
l
 40 [mm]
Max. fixture thickness
t fix
 5 [mm]
Head-Ø dK 13.0 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4006209441220 
To product variant
FNA II 6 x 30/5 Art.-No. 044115
6 [mm]
45 [mm]
40 [mm]
5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 45 [mm]
Anchor length
l
 40 [mm]
Max. fixture thickness
t fix
 5 [mm]
Head-Ø dK 13.0 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4006209441152 
To product variant
FNA II 6 x 25/5 Art.-No. 044121
6 [mm]
40 [mm]
35 [mm]
5 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 40 [mm]
Anchor length
l
 35 [mm]
Max. fixture thickness
t fix
 5 [mm]
Head-Ø dK 13.0 [mm]
Amount 100 Unit(s)
GTIN (EAN Code) 4006209441213 
To product variant
FNA II 6 x 30 M6/5 C Art.-No. 518443
— 
6 [mm]
— 
— 
— 

Attributes

ETA-approval — 
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings — 
Anchor length — 
Max. fixture thickness — 
Head-Ø — 
Amount — 
GTIN (EAN Code) 4048962150384 
To product variant
FNA II 6 x 30/125 A4 Art.-No. 516942
6 [mm]
165 [mm]
160 [mm]
125 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 165 [mm]
Anchor length
l
 160 [mm]
Max. fixture thickness
t fix
 125 [mm]
Head-Ø — 
Amount 50 Unit(s)
GTIN (EAN Code) 4048962142174 
To product variant

Approvals

 
Title Type Created Valid Till
Title ETA - European Technical Assessment (PDF, 1 MB) European Technical Assessment for fischer Nail anchor FNA II Type ETA-06/0175 Created 10/28/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Type DoP No. 0756-CPD-0331 Created 6/12/2013 Valid Till