Nail anchor FNA II

The installation-friendly hammerset anchor for multiple fixings

The fischer nail anchor FNA II with a nail head is made from zinc-plated steel, stainless steel, and highly corrosion-resistant steel. The FNA II is primarily suitable for the anchoring of fire protection boards, ventilation systems, metal rails, and subframe systems. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is mounted in a few hammer blows or with a hammer drill in a time-saving push-through installation. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.

To all Variants
Advantages
  • The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
  • The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
  • The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
  • The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
  • A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.
FNA II 6 x 30/50 C Art.-No. 500569
6 [mm]
90 [mm]
85 [mm]
50 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 90 [mm]
Anchor length
l
 85 [mm]
Max. fixture thickness
t fix
 50 [mm]
Head-Ø dK 13.0 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4048962001204 
To product variant
FNA II 6 x 30/50 A4 Art.-No. 046024
6 [mm]
90 [mm]
85 [mm]
50 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 90 [mm]
Anchor length
l
 85 [mm]
Max. fixture thickness
t fix
 50 [mm]
Head-Ø dK 13.0 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4006209460245 
To product variant
FNA II 6 x 30/40 A4 Art.-No. 046023
6 [mm]
— 
— 
40 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings — 
Anchor length — 
Max. fixture thickness
t fix
 40 [mm]
Head-Ø dK 13.0 [mm]
Amount — 
GTIN (EAN Code) 4006209460238 
To product variant
FNA II 6 x 30/30 C Art.-No. 044125
6 [mm]
70 [mm]
65 [mm]
30 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 70 [mm]
Anchor length
l
 65 [mm]
Max. fixture thickness
t fix
 30 [mm]
Head-Ø dK 13.0 [mm]
Amount 25 Unit(s)
GTIN (EAN Code) 4006209441251 
To product variant
FNA II 6 x 30/30 C Art.-No. 518442
— 
6 [mm]
70 [mm]
65 [mm]
30 [mm]

Attributes

ETA-approval — 
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 70 [mm]
Anchor length
l
 65 [mm]
Max. fixture thickness
t fix
 30 [mm]
Head-Ø dK 13.0 [mm]
Amount — 
GTIN (EAN Code) 4048962150377 
To product variant
FNA II 6 x 30/30 A4 Art.-No. 044123
6 [mm]
70 [mm]
65 [mm]
30 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 70 [mm]
Anchor length
l
 65 [mm]
Max. fixture thickness
t fix
 30 [mm]
Head-Ø dK 13.0 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4006209441237 
To product variant
FNA II 6 x 30/30 Art.-No. 044116
6 [mm]
70 [mm]
65 [mm]
30 [mm]

Attributes

ETA-approval
Drill hole diameter
d0
 6 [mm]
Min. drill hole depth for through fixings
h2
 70 [mm]
Anchor length
l
 65 [mm]
Max. fixture thickness
t fix
 30 [mm]
Head-Ø dK 13.0 [mm]
Amount 50 Unit(s)
GTIN (EAN Code) 4006209441169 
To product variant
Legend   =   Permission Available —  =   Permission not Available

Approvals

 
Title Type Created Valid Till
Title ETA - European Technical Assessment (PDF, 1 MB) European Technical Assessment for fischer Nail anchor FNA II Type ETA-06/0175 Created 10/28/2016 Valid Till
Title DOP - Declaration of Performance (PDF, 1 MB) Type DoP No. 0756-CPD-0331 Created 6/12/2013 Valid Till